Cisco ASA 5506-X Hardware-Installationshandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Netzwerk-Hardware Cisco ASA 5506-X herunter. Cisco ASA 5506-X 26 Seiten. Threat defense reimage guide
Auch für Cisco ASA 5506-X: Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (14 seiten), Handbuch zur einfachen Einrichtung (11 seiten), Software-Handbuch (37 seiten), Montieren und anschließen (12 seiten), Installationshandbuch (46 seiten), Montieren Sie das Fahrgestell (10 seiten)

Mount and Connect the ASA

becomes active. See

console port.

c) Gigabit Ethernet ports – For the network interfaces; use standard RJ-45 Ethernet cables.

Step 2

Connect the power cord to the ASA, and plug the other end to your power source.

The ASA 5506-X does not have an on/off switch; the device powers on when you plug it into a power source.

Note

Step 3

Check the Status LED on the ASA chassis.

When it is solid green, the ASA has passed power-on diagnostics.

What to Do Next

You can now proceed to configuration of the ASA, as described in the Quick Start Guide, found at

www.cisco.com/go/asadocs.

Connect to a Console Terminal or PC

The serial ports provide administrative access to the ASA either with a console terminal or a PC. To configure

the ASA through the CLI, you must establish a connection between the ASA console port and either a terminal

or a PC.

This section describes how to connect to a console terminal or a PC, and contains the following topics:

You must install a USB device driver the first time a Microsoft Windows-based PC is connected to the USB

serial port on the ASA, otherwise the connection fails.

To uninstall the driver, use the Add Remove Programs utility or the Setup-exe program.

Note

Disconnect the ASA console terminal before uninstalling the driver.

Step 1

Obtain the appropriate driver (Cisco_usbconsole_driver_X_X_zip, where X is a revision number) for your ASA model

from the Cisco

Step 2

Install the driver.

Step 3

Connect a USB 5-pin Mini USB Type B to the USB console port as shown in the following figure.

Online Only

Connect to a Console Terminal or PC, on page 19

Download Software

site, USB Console Software category.

Connect to a Console Terminal or PC

for specific instructions for connecting the

Cisco ASA 5506-X Hardware Installation Guide

http://