Cisco ASA 5506-X Manual de instalación del hardware - Página 23

Navegue en línea o descargue pdf Manual de instalación del hardware para Hardware de red Cisco ASA 5506-X. Cisco ASA 5506-X 26 páginas. Threat defense reimage guide
También para Cisco ASA 5506-X: Manual de inicio rápido (10 páginas), Manual de inicio rápido (14 páginas), Manual de instalación sencilla (11 páginas), Manual de software (37 páginas), Montar y conectar (12 páginas), Manual de instalación (46 páginas), Montar el chasis (10 páginas)

Mount and Connect the ASA

becomes active. See

console port.

c) Gigabit Ethernet ports – For the network interfaces; use standard RJ-45 Ethernet cables.

Step 2

Connect the power cord to the ASA, and plug the other end to your power source.

The ASA 5506-X does not have an on/off switch; the device powers on when you plug it into a power source.

Note

Step 3

Check the Status LED on the ASA chassis.

When it is solid green, the ASA has passed power-on diagnostics.

What to Do Next

You can now proceed to configuration of the ASA, as described in the Quick Start Guide, found at

www.cisco.com/go/asadocs.

Connect to a Console Terminal or PC

The serial ports provide administrative access to the ASA either with a console terminal or a PC. To configure

the ASA through the CLI, you must establish a connection between the ASA console port and either a terminal

or a PC.

This section describes how to connect to a console terminal or a PC, and contains the following topics:

You must install a USB device driver the first time a Microsoft Windows-based PC is connected to the USB

serial port on the ASA, otherwise the connection fails.

To uninstall the driver, use the Add Remove Programs utility or the Setup-exe program.

Note

Disconnect the ASA console terminal before uninstalling the driver.

Step 1

Obtain the appropriate driver (Cisco_usbconsole_driver_X_X_zip, where X is a revision number) for your ASA model

from the Cisco

Step 2

Install the driver.

Step 3

Connect a USB 5-pin Mini USB Type B to the USB console port as shown in the following figure.

Online Only

Connect to a Console Terminal or PC, on page 19

Download Software

site, USB Console Software category.

Connect to a Console Terminal or PC

for specific instructions for connecting the

Cisco ASA 5506-X Hardware Installation Guide

http://