Cisco ATA 186 Konfiguration - Seite 26

Blättern Sie online oder laden Sie pdf Konfiguration für Gateway Cisco ATA 186 herunter. Cisco ATA 186 28 Seiten. Analog telephone adaptor
Auch für Cisco ATA 186: Datenblatt (7 seiten), Übersicht (11 seiten), Übersicht Handbuch (11 seiten), Konfigurationshandbuch (8 seiten), Benutzerhandbuch (12 seiten), Installations- und Konfigurationshandbuch (13 seiten), Anweisungen für die Installation (6 seiten), Konfiguration (6 seiten)

• If there is no dial tone, make sure that the telephone line

cord from the telephone is plugged into the appropriate

port on the Cisco ATA. Make sure that your Cisco ATA is

properly registered on your Call Control system. Test

another phone; if this phone does not work either, there

may be a problem with the current configuration or with

the Cisco ATA.

• A busy tone indicates that the party you called is not

available. Try your call again later. A fast-busy tone

indicates that you dialed an invalid number.

• After power up, if the function button continues to blink

slowly, the Cisco ATA cannot locate the DHCP server.

Check the Ethernet connection and the availability of the

DHCP server.

• The DHCP server should show an incoming request from

the MAC address listed on the product label or given by the

voice prompt.

Customers who obtained their equipment through

Note

service providers, independent dealers and other third

parties must contact their equipment provider for

technical assistance.