Cisco ATA 186 구성 - 페이지 26
{카테고리_이름} Cisco ATA 186에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 186 28 페이지. Analog telephone adaptor
Cisco ATA 186에 대해서도 마찬가지입니다: 데이터시트 (7 페이지), 개요 (11 페이지), 개요 매뉴얼 (11 페이지), 구성 매뉴얼 (8 페이지), 사용자 설명서 (12 페이지), 설치 및 구성 매뉴얼 (13 페이지), 설치 지침 (6 페이지), 구성 (6 페이지)
• If there is no dial tone, make sure that the telephone line
cord from the telephone is plugged into the appropriate
port on the Cisco ATA. Make sure that your Cisco ATA is
properly registered on your Call Control system. Test
another phone; if this phone does not work either, there
may be a problem with the current configuration or with
the Cisco ATA.
• A busy tone indicates that the party you called is not
available. Try your call again later. A fast-busy tone
indicates that you dialed an invalid number.
• After power up, if the function button continues to blink
slowly, the Cisco ATA cannot locate the DHCP server.
Check the Ethernet connection and the availability of the
DHCP server.
• The DHCP server should show an incoming request from
the MAC address listed on the product label or given by the
voice prompt.
Customers who obtained their equipment through
Note
service providers, independent dealers and other third
parties must contact their equipment provider for
technical assistance.
26