Clarke CCO14B Handbuch für Betrieb und Wartung - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Säge Clarke CCO14B herunter. Clarke CCO14B 17 Seiten. Abrasive cut-off saw
Seite druckenCHANGING THE CARBON BRUSHES
Maintenance to the motor is limited to changing
the carbon brushes.
These will naturally wear with use and require
replacing. They should be checked periodically as
follows:
1. Unscrew and remove the plastic covers on the
end of the motor with a screwdriver.
2. Pull out the brushes complete with springs and
retainers.
3. Check the brush length, if the 'wear line'
cannot be seen ('A' fig.8), the pair should be
renewed.
4. Replace the brushes, taking care to ensure that
the tabs on the end of the spring retainer ('B'
fig.8), correctly enter the elongated chamber as you push it in and screw
on the cap.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11