Clarke CCO14B Руководство по эксплуатации и техническому обслуживанию - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Пила Clarke CCO14B. Clarke CCO14B 17 страниц. Abrasive cut-off saw
Печатать страницуCHANGING THE CARBON BRUSHES
Maintenance to the motor is limited to changing
the carbon brushes.
These will naturally wear with use and require
replacing. They should be checked periodically as
follows:
1. Unscrew and remove the plastic covers on the
end of the motor with a screwdriver.
2. Pull out the brushes complete with springs and
retainers.
3. Check the brush length, if the 'wear line'
cannot be seen ('A' fig.8), the pair should be
renewed.
4. Replace the brushes, taking care to ensure that
the tabs on the end of the spring retainer ('B'
fig.8), correctly enter the elongated chamber as you push it in and screw
on the cap.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11