Clarke CCO14B Instrukcja obsługi i konserwacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Piła Clarke CCO14B. Clarke CCO14B 17 stron. Abrasive cut-off saw

CHANGING THE CARBON BRUSHES

Maintenance to the motor is limited to changing

the carbon brushes.

These will naturally wear with use and require

replacing. They should be checked periodically as

follows:

1. Unscrew and remove the plastic covers on the

end of the motor with a screwdriver.

2. Pull out the brushes complete with springs and

retainers.

3. Check the brush length, if the 'wear line'

cannot be seen ('A' fig.8), the pair should be

renewed.

4. Replace the brushes, taking care to ensure that

the tabs on the end of the spring retainer ('B'

fig.8), correctly enter the elongated chamber as you push it in and screw

on the cap.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]