3D Hobby Shop 70 AJ SLICK Montageanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3D Hobby Shop 70 AJ SLICK herunter. 3D Hobby Shop 70 AJ SLICK 19 Seiten.

Seite drucken
9
Install the rudder servo, servo arm, and ball links with locking nuts as shown.
The rudder pull-pull cables are assembled as shown in the diagram. Crimp the crimp tubes firmly
with pliers, and use a drop of thin CA glue on each crimp tube after you are done crimping.
Crimp the servo end of the cables first. The cables cross once inside the fuselage to form an "X".