3D Hobby Shop 70 AJ SLICK Montagehandleiding - Pagina 9

Blader online of download pdf Montagehandleiding voor {categorie_naam} 3D Hobby Shop 70 AJ SLICK. 3D Hobby Shop 70 AJ SLICK 19 pagina's.

Install the rudder servo, servo arm, and ball links with locking nuts as shown.

The rudder pull-pull cables are assembled as shown in the diagram. Crimp the crimp tubes firmly

with pliers, and use a drop of thin CA glue on each crimp tube after you are done crimping.

Crimp the servo end of the cables first. The cables cross once inside the fuselage to form an "X".