ALUZ ZIBI A1 Series Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Beleuchtungsanlagen ALUZ ZIBI A1 Series herunter. ALUZ ZIBI A1 Series 13 Seiten. Surface zuco pivot bios illuminated
Auch für ALUZ ZIBI A1 Series: Installationsanleitung Handbuch (12 seiten), Handbuch (11 seiten), Handbuch (11 seiten), Installationsanleitung Handbuch (11 seiten)
Seite drucken1
Determine number of reflectors needed. Reflectors are available in
1', 2', 3', or 4' increments. Specify total length of reflectors needed.
2
Position reflectors on luminaires, then install 3 set screws on each
reflector segment to secure in place. Do not over-tighten set screws
1170 N Red Gum St, Anaheim, CA 92806
aluz.lighting
© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
A1 Series | Surface
ZIBI Standard Dynamic White
(A1-ZIBI-STN-DWH)
866.ALUZ.LTG | 714.535.7900
3
If applicable, connect disconnects between luminaires. Slide
shrink tube over connectors and apply heat. The shrink tube will
shrink down, sealing the connectors. Apply silicone around sealed
connectors for a stronger seal.
4
Mount luminaires at least 12" away from the wall.
Page 11 of 13
Reflector (A1-ZIBI-STN-RE1)
12"
Installation Instructions
9 / 11 / 2023 / Rev 4