Folyon H300 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Cámara climática Folyon H300. Folyon H300 16 páginas. Temperature humidity chamber

To replace the desiccant follow the procedure below.

•

Turn off and unplug the H300 chamber.

•

Remove the desiccant reservoir by gently spreading the holder clamps and pulling the reservoir

away from the back of the chamber. As you pull the two connector hoses will extend.

•

Pull until the hoses will not extend farther. Do not force the hoses to extend. Do not remove the

hoses from the desiccant reservoir. See Figure 2 below.

Figure 2: Desiccant Reservoir Pulled From H300

•

Unscrew the reservoir plug and remove the spring, dust filter and metal mesh.

•

Remove the used up desiccant. The used desiccant can be regenerated by heating it above 395°F

(200°C) for one to two hours.

•

Fill the reservoir with a fresh desiccant. Do not overfill or underfill.

•

Replace the dust filter, followed by the metal mesh, followed by the spring.

H300 Temperature Humidity Chamber

Page 6