HP 234664-002 - ProLiant - ML330T02 Manual de aplicación - Página 25

Navegue en línea o descargue pdf Manual de aplicación para Escritorio HP 234664-002 - ProLiant - ML330T02. HP 234664-002 - ProLiant - ML330T02 26 páginas. Visualization and acceleration in hp proliant servers
También para HP 234664-002 - ProLiant - ML330T02: Preguntas frecuentes (4 páginas), Manual de aplicación (35 páginas), Libro Blanco técnico (12 páginas), Actualización del firmware (9 páginas), Visión general (20 páginas), Manual de introducción (22 páginas), Manual de solución de problemas (18 páginas), Manual de aplicación (11 páginas), Manual de instalación (2 páginas), Manual de configuración (2 páginas), Manual de introducción (19 páginas), Manual de actualización (9 páginas), Manual de actualización (16 páginas), Manual de introducción (10 páginas), Manual de instrucciones de instalación (15 páginas), Resumen tecnológico (9 páginas)

Table A-2. Known issues with the PSP

Issue

Details

Workaround To install a Windows Server 2008 network adapter interface on Windows Server

2008, complete the following steps:

1. Locate cp006316.exe in your PSP folder. Execute this component and select

2. From the Windows 2008 Start menu, right-click Computer and select Properties.

3. On the System Properties page, select Device Manager under Tasks in the upper left

4. Locate the multifunction gigabit device. It will be listed under the section called

5. Right-click the device and select Update Driver Software.

6. A window titled "Update Driver Software - Ethernet Controller" should now be

7. In the following window, enter the directory the component was extracted to (from

8. Select Install on the resulting "Windows Security" window.

9. The Virtual Bus Device is now installed. As a result, the ndis device will be exposed.

10. Select Locate and install driver software.

11. Select Do not search online on the next window, and then select I do not have the

12. On the window with the heading "Windows couldn't find driver software for your

13. Again, enter the directory from Step 1 in the text edit box and select Next.

14. Select Install on the resulting "Windows Security" window.

Extract. Remember the name of the directory where the drivers are being placed.

corner of the window.

"Other Devices" and will have a yellow exclamation point next to it (indicating no

driver has been loaded). The device should be called "Ethernet Controller."

displayed. Select Browse my computer for driver software.

Step 1) in the text field under Search for driver software in this location: and then

click Next.

Windows will respond by displaying a "Found New Hardware" dialog.

disc. Show me other options. on the following window.

device" select Browse my computer for driver software (advanced).