HP StorageWorks 2/32 - SAN Switch Nota de publicación - Página 10

Navegue en línea o descargue pdf Nota de publicación para Interruptor HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 32 páginas. Fabric manager version 3.0.x release notes
También para HP StorageWorks 2/32 - SAN Switch: Manual de instrucciones de instalación (20 páginas), Manual del usuario (22 páginas), Notas de la versión del firmware (14 páginas), Nota de publicación (48 páginas), Manual de instrucciones de instalación (6 páginas), Nota de publicación (14 páginas), Nota de publicación (4 páginas)

Imprimir página
HP StorageWorks 2/32 - SAN Switch Nota de publicación
SAN Switch 2/32 Firmware Version 4.0.2b Updates
Fabric OS Command Changes
The following lists new or modified commands added to the Fabric OS Version 4.0.2b:
•
killtelnet command
•
loopporttest command
•
portcfgdelayflogi command
•
supportshow command
•
portcfglongdistance command
•
portcfgshow command
•
ifmodeset command
NOTE: For more information about these commands, refer to the hp StorageWorks Fabric OS
Version 3.0.x/4.0.x Reference Manual.
portcfglongdistance Command Summary
Extended links in the same SAN are either 1Gb or 2Gb, but not both. If you have 1 Gb
extended links in the the SAN you can not add a 2Gb Extended Link to the same SAN.
Enhancement
A new parameter was added to this command. The new syntax is as follows:
portCfgLongDistance [slot/]port[, distance_level][, linkinitmode]
linkinitmode Operand
The linlinitmode operand applies to long distance setup only. It does not affect a
normal link. It is added to ensure the long distance link initialization sequence.
It is not required for long distance, but may be useful when initiating L1 and L2 links.
linkinitmode Usage
Specify 1 to activate a long distance link initialization sequence. Specify 0 to
deactivate this mode. The default value is 0 (disabled). This operand is optional. The
following example is for a 100km link on a port in a V4.0 switch with long distance
link initialization protocol enabled:
switch:admin> portCfgLongDistance 2/3 L2 1
done.
10
SAN switch 2/32, version 4.0.2b release notes