HP StorageWorks 2/32 - SAN Switch Nota di rilascio - Pagina 10

Sfoglia online o scarica il pdf Nota di rilascio per Interruttore HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 32. Fabric manager version 3.0.x release notes
Anche per HP StorageWorks 2/32 - SAN Switch: Manuale di istruzioni per l'installazione (20 pagine), Manuale d'uso (22 pagine), Note di rilascio del firmware (14 pagine), Nota di rilascio (48 pagine), Manuale di istruzioni per l'installazione (6 pagine), Nota di rilascio (14 pagine), Nota di rilascio (4 pagine)

Stampa la pagina
HP StorageWorks 2/32 - SAN Switch Nota di rilascio
SAN Switch 2/32 Firmware Version 4.0.2b Updates
Fabric OS Command Changes
The following lists new or modified commands added to the Fabric OS Version 4.0.2b:
•
killtelnet command
•
loopporttest command
•
portcfgdelayflogi command
•
supportshow command
•
portcfglongdistance command
•
portcfgshow command
•
ifmodeset command
NOTE: For more information about these commands, refer to the hp StorageWorks Fabric OS
Version 3.0.x/4.0.x Reference Manual.
portcfglongdistance Command Summary
Extended links in the same SAN are either 1Gb or 2Gb, but not both. If you have 1 Gb
extended links in the the SAN you can not add a 2Gb Extended Link to the same SAN.
Enhancement
A new parameter was added to this command. The new syntax is as follows:
portCfgLongDistance [slot/]port[, distance_level][, linkinitmode]
linkinitmode Operand
The linlinitmode operand applies to long distance setup only. It does not affect a
normal link. It is added to ensure the long distance link initialization sequence.
It is not required for long distance, but may be useful when initiating L1 and L2 links.
linkinitmode Usage
Specify 1 to activate a long distance link initialization sequence. Specify 0 to
deactivate this mode. The default value is 0 (disabled). This operand is optional. The
following example is for a 100km link on a port in a V4.0 switch with long distance
link initialization protocol enabled:
switch:admin> portCfgLongDistance 2/3 L2 1
done.
10
SAN switch 2/32, version 4.0.2b release notes