Ricoh Pro L5160 Guía de inicio rápido - Página 13

Navegue en línea o descargue pdf Guía de inicio rápido para Impresora Ricoh Pro L5160. Ricoh Pro L5160 32 páginas. Additional function 2
También para Ricoh Pro L5160: Manual de configuración de Rip (44 páginas), Manual de información de seguridad (32 páginas), Manual (12 páginas)

Imprimir página
Ricoh Pro L5160 Guía de inicio rápido
CIP Training L5160/L5130

Additional Features

New Cut Position
3. Select the position from where to cut media from either [Sheet Exit Position], [Position
of the cutter] or [Base line position on the media guide].
4. Press [Cut].
Start cutting at the cut position that you set.
* When [Sheet Exit Position] is selected, media is automatically fed from sheet exit
position to the media cutter position (about 60mm length) before starting to cut.
-> Media is cut at the position indicated
* When [Position of the cutter] is selected, cutting start without media feeding.
-> Media is cut at the position indicated
* When [Base line position on the media guide] is selected, media is automatically fed
from "scissor mark" on the media guide to the media cutter position (about 630mm
length) before starting to cut.
-> Media is cut at the position indicated
5. Press [Set].
as red arrow
in following figure.
as blue arrow
in following figure.
as green arrow
in following figure.