Ricoh Pro L5160 Guide de démarrage rapide - Page 13
Parcourez en ligne ou téléchargez le pdf Guide de démarrage rapide pour {nom_de_la_catégorie} Ricoh Pro L5160. Ricoh Pro L5160 32 pages. Additional function 2
Également pour Ricoh Pro L5160 : Manuel de paramétrage du Rip (44 pages), Manuel d'information sur la sécurité (32 pages), Manuel (12 pages)
Imprimer la page
CIP Training L5160/L5130
Additional Features
New Cut Position
3. Select the position from where to cut media from either [Sheet Exit Position], [Position
of the cutter] or [Base line position on the media guide].
4. Press [Cut].
Start cutting at the cut position that you set.
* When [Sheet Exit Position] is selected, media is automatically fed from sheet exit
position to the media cutter position (about 60mm length) before starting to cut.
-> Media is cut at the position indicated
* When [Position of the cutter] is selected, cutting start without media feeding.
-> Media is cut at the position indicated
* When [Base line position on the media guide] is selected, media is automatically fed
from "scissor mark" on the media guide to the media cutter position (about 630mm
length) before starting to cut.
-> Media is cut at the position indicated
5. Press [Set].
as red arrow
in following figure.
as blue arrow
in following figure.
as green arrow
in following figure.