- ページ 13
プリンター Ricoh Pro L5160のPDF クイック・スタート・ガイドをオンラインで閲覧またはダウンロードできます。Ricoh Pro L5160 32 ページ。 Additional function 2
Ricoh Pro L5160 にも： リップ設定マニュアル (44 ページ), 安全情報マニュアル (32 ページ), マニュアル (12 ページ)
ページを印刷する
CIP Training L5160/L5130
Additional Features
New Cut Position
3. Select the position from where to cut media from either [Sheet Exit Position], [Position
of the cutter] or [Base line position on the media guide].
4. Press [Cut].
Start cutting at the cut position that you set.
* When [Sheet Exit Position] is selected, media is automatically fed from sheet exit
position to the media cutter position (about 60mm length) before starting to cut.
-> Media is cut at the position indicated
* When [Position of the cutter] is selected, cutting start without media feeding.
-> Media is cut at the position indicated
* When [Base line position on the media guide] is selected, media is automatically fed
from "scissor mark" on the media guide to the media cutter position (about 630mm
length) before starting to cut.
-> Media is cut at the position indicated
5. Press [Set].
as red arrow
in following figure.
as blue arrow
in following figure.
as green arrow
in following figure.