Ricoh Pro L5160 빠른 시작 Quide - 페이지 13
{카테고리_이름} Ricoh Pro L5160에 대한 빠른 시작 Quide을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L5160 32 페이지. Additional function 2
Ricoh Pro L5160에 대해서도 마찬가지입니다: 추출 설정 매뉴얼 (44 페이지), 안전 정보 매뉴얼 (32 페이지), 매뉴얼 (12 페이지)
페이지 인쇄
CIP Training L5160/L5130
Additional Features
New Cut Position
3. Select the position from where to cut media from either [Sheet Exit Position], [Position
of the cutter] or [Base line position on the media guide].
4. Press [Cut].
Start cutting at the cut position that you set.
* When [Sheet Exit Position] is selected, media is automatically fed from sheet exit
position to the media cutter position (about 60mm length) before starting to cut.
-> Media is cut at the position indicated
* When [Position of the cutter] is selected, cutting start without media feeding.
-> Media is cut at the position indicated
* When [Base line position on the media guide] is selected, media is automatically fed
from "scissor mark" on the media guide to the media cutter position (about 630mm
length) before starting to cut.
-> Media is cut at the position indicated
5. Press [Set].
as red arrow
in following figure.
as blue arrow
in following figure.
as green arrow
in following figure.