Epson WorkForce 600 Series Manual de instalación en red - Página 36

Navegue en línea o descargue pdf Manual de instalación en red para Software Epson WorkForce 600 Series. Epson WorkForce 600 Series 41 páginas. Using the control panel for wireless network installation
También para Epson WorkForce 600 Series: Manual del usuario (34 páginas), Manual del usuario (38 páginas), Sustitución de cartuchos (2 páginas), Información importante sobre la instalación (2 páginas), Especificaciones (2 páginas), Manual Start Here (9 páginas), Boletín de asistencia sobre productos (5 páginas), Manual de funciones (28 páginas)

■

The printer's IP Address may have changed. If the printer is set to obtain an IP

address automatically, the IP address may change each time the printer is

turned on. If the IP address has changed, you will need to repeat the steps in

"Configure Epson Scan Network Settings" on page 29. To keep the IP address

from changing, try the following: always power on your network devices in

the same order, always keep the printer on, or set your DHCP server to reserve

an IP address for the printer (see your router's documentation for details).

Print a Network Status Sheet

1. If necessary, press the

the Home menu, then select

2. Select

Network Settings

Troubleshooting

Home

WorkForce 600 Series

and Artisan 700 Series:

Press l or r to select

Setup, then press OK.

WorkForce 600 Series

and Artisan 700 Series:

Press l or r to select

Network Settings, then

press OK.

button on the printer control panel to return to

Setup

Artisan 800 Series:

Press Setup.

Artisan 800 Series:

Press r, then press

Network Settings.