Epson WorkForce 600 Series Ağ Kurulum Kılavuzu - Sayfa 36

Yazılım Epson WorkForce 600 Series için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Epson WorkForce 600 Series 41 sayfaları. Using the control panel for wireless network installation
Ayrıca Epson WorkForce 600 Series için: Kullanıcı Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (38 sayfalar), Kartuşların Değiştirilmesi (2 sayfalar), Önemli Kurulum Bilgileri (2 sayfalar), Teknik Özellikler (2 sayfalar), Buradan Başlayın Kılavuzu (9 sayfalar), Ürün Destek Bülteni (5 sayfalar), İşlev Kılavuzu (28 sayfalar)

■

The printer's IP Address may have changed. If the printer is set to obtain an IP

address automatically, the IP address may change each time the printer is

turned on. If the IP address has changed, you will need to repeat the steps in

"Configure Epson Scan Network Settings" on page 29. To keep the IP address

from changing, try the following: always power on your network devices in

the same order, always keep the printer on, or set your DHCP server to reserve

an IP address for the printer (see your router's documentation for details).

Print a Network Status Sheet

1. If necessary, press the

the Home menu, then select

2. Select

Network Settings

Troubleshooting

Home

WorkForce 600 Series

and Artisan 700 Series:

Press l or r to select

Setup, then press OK.

WorkForce 600 Series

and Artisan 700 Series:

Press l or r to select

Network Settings, then

press OK.

button on the printer control panel to return to

Setup

Artisan 800 Series:

Press Setup.

Artisan 800 Series:

Press r, then press

Network Settings.