Epson WorkForce 600 Series 네트워크 설치 매뉴얼 - 페이지 36

{카테고리_이름} Epson WorkForce 600 Series에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson WorkForce 600 Series 41 페이지. Using the control panel for wireless network installation
Epson WorkForce 600 Series에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 카트리지 교체 (2 페이지), 중요한 설정 정보 (2 페이지), 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (9 페이지), 제품 지원 게시판 (5 페이지), 기능 설명서 (28 페이지)

페이지 인쇄
Epson WorkForce 600 Series 네트워크 설치 매뉴얼
■
The printer's IP Address may have changed. If the printer is set to obtain an IP
address automatically, the IP address may change each time the printer is
turned on. If the IP address has changed, you will need to repeat the steps in
"Configure Epson Scan Network Settings" on page 29. To keep the IP address
from changing, try the following: always power on your network devices in
the same order, always keep the printer on, or set your DHCP server to reserve
an IP address for the printer (see your router's documentation for details).

Print a Network Status Sheet

1. If necessary, press the
the Home menu, then select
2. Select
Network Settings
36
Troubleshooting
Home
WorkForce 600 Series
and Artisan 700 Series:
Press l or r to select
Setup, then press OK.
.
WorkForce 600 Series
and Artisan 700 Series:
Press l or r to select
Network Settings, then
press OK.
button on the printer control panel to return to
.
Setup
Artisan 800 Series:
Press Setup.
Artisan 800 Series:
Press r, then press
Network Settings.