Aluprof DC 448 Manual de programación - Página 2

Navegue en línea o descargue pdf Manual de programación para Transmisor Aluprof DC 448. Aluprof DC 448 4 páginas.
También para Aluprof DC 448: Manual de programación (4 páginas)

Imprimir página

2. PROGRAMMING THE TRANSMITTER

2.1. Operating mode change

Hold the „SET P2" button for 2

second will switch the transmitter

to the 'MAN' mode.

2.2. Key lock function

Hold the „OK/K+" and „MODE/K-„

for 3 seconds to active the key lock

function.

DC 448 PROGRAMMING MANUAL

Then press the „P2" button for two

seconds. The transmitter switches to

the automatic control mode „AUTO"

if any button on the transmitter is pressed

while the keypad lock is activated, the

information „LOCK" is displayed on the

transmitter display.

The next press of the „P2" button

for two seconds will switch the

transmitter to random control mode

If key lock function is active, hold the

„OK/K+" and „MODE/K-„ for 3 seconds to

deactivate the key lock function.

We reserve the right to any technical change. Valid on 2019.03.13