Aluprof DC 448 Handleiding voor programmering - Pagina 2
Blader online of download pdf Handleiding voor programmering voor {categorie_naam} Aluprof DC 448. Aluprof DC 448 4 pagina's.
Ook voor Aluprof DC 448: Handleiding voor programmering (4 pagina's)
Pagina afdrukken
2. PROGRAMMING THE TRANSMITTER
2.1. Operating mode change
Hold the „SET P2" button for 2
second will switch the transmitter
to the 'MAN' mode.
2.2. Key lock function
Hold the „OK/K+" and „MODE/K-„
for 3 seconds to active the key lock
function.
2
DC 448 PROGRAMMING MANUAL
Then press the „P2" button for two
seconds. The transmitter switches to
the automatic control mode „AUTO"
if any button on the transmitter is pressed
while the keypad lock is activated, the
information „LOCK" is displayed on the
transmitter display.
The next press of the „P2" button
for two seconds will switch the
transmitter to random control mode
If key lock function is active, hold the
„OK/K+" and „MODE/K-„ for 3 seconds to
deactivate the key lock function.
We reserve the right to any technical change. Valid on 2019.03.13