Aluprof DC 448 Programming Manual - Page 2

Browse online or download pdf Programming Manual for Transmitter Aluprof DC 448. Aluprof DC 448 4 pages.
Also for Aluprof DC 448: Programming Manual (4 pages)

Print Page

2. PROGRAMMING THE TRANSMITTER

2.1. Operating mode change

Hold the „SET P2" button for 2

second will switch the transmitter

to the 'MAN' mode.

2.2. Key lock function

Hold the „OK/K+" and „MODE/K-„

for 3 seconds to active the key lock

function.

DC 448 PROGRAMMING MANUAL

Then press the „P2" button for two

seconds. The transmitter switches to

the automatic control mode „AUTO"

if any button on the transmitter is pressed

while the keypad lock is activated, the

information „LOCK" is displayed on the

transmitter display.

The next press of the „P2" button

for two seconds will switch the

transmitter to random control mode

If key lock function is active, hold the

„OK/K+" and „MODE/K-„ for 3 seconds to

deactivate the key lock function.

We reserve the right to any technical change. Valid on 2019.03.13