Aluprof DC 448 프로그래밍 매뉴얼 - 페이지 2

{카테고리_이름} Aluprof DC 448에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof DC 448 4 페이지.
Aluprof DC 448에 대해서도 마찬가지입니다: 프로그래밍 매뉴얼 (4 페이지)

2. PROGRAMMING THE TRANSMITTER

2.1. Operating mode change

Hold the „SET P2" button for 2

second will switch the transmitter

to the 'MAN' mode.

2.2. Key lock function

Hold the „OK/K+" and „MODE/K-„

for 3 seconds to active the key lock

function.

DC 448 PROGRAMMING MANUAL

Then press the „P2" button for two

seconds. The transmitter switches to

the automatic control mode „AUTO"

if any button on the transmitter is pressed

while the keypad lock is activated, the

information „LOCK" is displayed on the

transmitter display.

The next press of the „P2" button

for two seconds will switch the

transmitter to random control mode

If key lock function is active, hold the

„OK/K+" and „MODE/K-„ for 3 seconds to

deactivate the key lock function.

We reserve the right to any technical change. Valid on 2019.03.13