HIKVISION TurboHD H0T Series Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 15 pages. Turbo hd bullet & dome camera
Également pour HIKVISION TurboHD H0T Series : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (17 pages)

Rotation Position

[0° to 355°]

8. Install the bubble back and tighten screws to finish

the installation.

Figure 2-11 Install the Bubble Back

2.4 Ceiling Mounting of Type IV Camera

Before you start:

The ceiling mounting and the wall mounting are similar.

Following takes ceiling mounting as an example.

Steps:

1. Align the snap joint, and then insert the screw driver

into the snap joint.

Figure 2-12 Disassemble the Camera

2. Pry the bubble by anticlockwise rotate the screw

driver and take off the black liner.

Figure 2-13 Remove the Bubble and the Black Liner

3. Paste the drill template (supplied) to the place

where you want to install the camera.

Figure 2-10 3-Axis Adjustment

Pan Position

[0° to 355°]

Tilt Adjusting Screw

Tilt Position

[0° to 75°]

Align the

Snap Joint

Anticlockwise