HIKVISION TurboHD H0T Series Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 15 pagina's. Turbo hd bullet & dome camera
Ook voor HIKVISION TurboHD H0T Series: Gebruikershandleiding (17 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (15 pagina's), Gebruikershandleiding (17 pagina's)

Rotation Position

[0° to 355°]

8. Install the bubble back and tighten screws to finish

the installation.

Figure 2-11 Install the Bubble Back

2.4 Ceiling Mounting of Type IV Camera

Before you start:

The ceiling mounting and the wall mounting are similar.

Following takes ceiling mounting as an example.

Steps:

1. Align the snap joint, and then insert the screw driver

into the snap joint.

Figure 2-12 Disassemble the Camera

2. Pry the bubble by anticlockwise rotate the screw

driver and take off the black liner.

Figure 2-13 Remove the Bubble and the Black Liner

3. Paste the drill template (supplied) to the place

where you want to install the camera.

Figure 2-10 3-Axis Adjustment

Pan Position

[0° to 355°]

Tilt Adjusting Screw

Tilt Position

[0° to 75°]

Align the

Snap Joint

Anticlockwise