Garmin echomap 40 series Manuel d'instructions d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Garmin echomap 40 series. Garmin echomap 40 series 15 pages. Vhf comm
Également pour Garmin echomap 40 series : Manuel du propriétaire (32 pages), Déclaration de conformité (1 pages), Manuel du pilote (22 pages), Manuel du propriétaire (30 pages), Manuel du propriétaire (50 pages)

Final Wiring Connections

Once the scanner is installed and the cable routed, you are ready to connect the Power, Ground and Marine Network.

1. Connect the Black Ground (-) wire to the vessel's negative power terminal.

2. Connect the Power (+) wire (with fuse holder) to the vessel's positive power terminal.

3. For a stand-alone network (MFD and Radar only), attach the RJ-45 Marine Network Cable to the RJ-45 socket on the back of the MFD.

For an expanded network (MFD, Radar, GMS 10), attach the RJ-45 Marine Network Cable to an open RJ-45 socket on the GMS 10

Network Power Expander. Tighten the RJ-45 locking ring clockwise until it is ﬁrmly sealed.

��

GMR 20/40 MARINE

GPS 17

RADAR

Stand Alone Network

��

Expanded Network

GARMIN

GPSMAP MFD

��

GMR 20/40 Radar Installation Instructions