Garmin echomap 40 series Installation Instructions Manual - Page 6
Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin echomap 40 series. Garmin echomap 40 series 15 pages. Vhf comm
Also for Garmin echomap 40 series: Owner's Manual (32 pages), Declaration Of Conformity (1 pages), Pilot's Manual (22 pages), Owner's Manual (30 pages), Owner's Manual (50 pages)
![Garmin echomap 40 series Installation Instructions Manual](/uploads/products/server2/2313253/2313253.jpg)
Final Wiring Connections
Once the scanner is installed and the cable routed, you are ready to connect the Power, Ground and Marine Network.
1. Connect the Black Ground (-) wire to the vessel's negative power terminal.
2. Connect the Power (+) wire (with fuse holder) to the vessel's positive power terminal.
3. For a stand-alone network (MFD and Radar only), attach the RJ-45 Marine Network Cable to the RJ-45 socket on the back of the MFD.
For an expanded network (MFD, Radar, GMS 10), attach the RJ-45 Marine Network Cable to an open RJ-45 socket on the GMS 10
Network Power Expander. Tighten the RJ-45 locking ring clockwise until it is firmly sealed.
��� ����� ������
�����
��� ��
��� ��
�������
������
4
GMR 20/40 MARINE
GPS 17
RADAR
Stand Alone Network
������ ��� ��
������ ������� ���� ��������
������
������ ���
�� ����������
Expanded Network
GARMIN
GPSMAP MFD
������ ��� ������
������ �������������
��������� ��������
������
������ ���
�� ��
GMR 20/40 Radar Installation Instructions