Garmin echomap 40 series 설치 지침 매뉴얼 - 페이지 6
{카테고리_이름} Garmin echomap 40 series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin echomap 40 series 15 페이지. Vhf comm
Garmin echomap 40 series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (32 페이지), 적합성 선언 (1 페이지), 파일럿 매뉴얼 (22 페이지), 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (50 페이지)
![Garmin echomap 40 series 설치 지침 매뉴얼](/uploads/products/server2/2313253/2313253.jpg)
Final Wiring Connections
Once the scanner is installed and the cable routed, you are ready to connect the Power, Ground and Marine Network.
1. Connect the Black Ground (-) wire to the vessel's negative power terminal.
2. Connect the Power (+) wire (with fuse holder) to the vessel's positive power terminal.
3. For a stand-alone network (MFD and Radar only), attach the RJ-45 Marine Network Cable to the RJ-45 socket on the back of the MFD.
For an expanded network (MFD, Radar, GMS 10), attach the RJ-45 Marine Network Cable to an open RJ-45 socket on the GMS 10
Network Power Expander. Tighten the RJ-45 locking ring clockwise until it is firmly sealed.
��� ����� ������
�����
��� ��
��� ��
�������
������
4
GMR 20/40 MARINE
GPS 17
RADAR
Stand Alone Network
������ ��� ��
������ ������� ���� ��������
������
������ ���
�� ����������
Expanded Network
GARMIN
GPSMAP MFD
������ ��� ������
������ �������������
��������� ��������
������
������ ���
�� ��
GMR 20/40 Radar Installation Instructions