Garmin echomap 40 series Manuale di istruzioni per l'installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Sistema GPS marino Garmin echomap 40 series. Garmin echomap 40 series 15. Vhf comm
Anche per Garmin echomap 40 series: Manuale d'uso (32 pagine), Dichiarazione di conformità (1 pagine), Manuale del pilota (22 pagine), Manuale d'uso (30 pagine), Manuale d'uso (50 pagine)
![Garmin echomap 40 series Manuale di istruzioni per l'installazione](/uploads/products/server2/2313253/2313253.jpg)
Final Wiring Connections
Once the scanner is installed and the cable routed, you are ready to connect the Power, Ground and Marine Network.
1. Connect the Black Ground (-) wire to the vessel's negative power terminal.
2. Connect the Power (+) wire (with fuse holder) to the vessel's positive power terminal.
3. For a stand-alone network (MFD and Radar only), attach the RJ-45 Marine Network Cable to the RJ-45 socket on the back of the MFD.
For an expanded network (MFD, Radar, GMS 10), attach the RJ-45 Marine Network Cable to an open RJ-45 socket on the GMS 10
Network Power Expander. Tighten the RJ-45 locking ring clockwise until it is firmly sealed.
��� ����� ������
�����
��� ��
��� ��
�������
������
4
GMR 20/40 MARINE
GPS 17
RADAR
Stand Alone Network
������ ��� ��
������ ������� ���� ��������
������
������ ���
�� ����������
Expanded Network
GARMIN
GPSMAP MFD
������ ��� ������
������ �������������
��������� ��������
������
������ ���
�� ��
GMR 20/40 Radar Installation Instructions