Brother HL-4040CN Instructions techniques - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions techniques pour {nom_de_la_catégorie} Brother HL-4040CN. Brother HL-4040CN 6 pages. Brother printer - laser printer user manual
Également pour Brother HL-4040CN : Brochure (4 pages), Manuel d'installation rapide (35 pages), Brochure & Specs (2 pages), Liste de référence des pièces (40 pages), Manuel de mise à jour des services (11 pages), Nettoyage et entretien (7 pages), Manuel d'entretien (13 pages), (danois) Manuel de l'utilisateur (35 pages)

Imprimer la page

Brother HL-4040CN Instructions techniques

Brother HL-4040CN Technical Instructions

PHOTO 11

PHOTO 12

PHOTO 13

PHOTO 14

PHOTO 15

Step 9

Using a Phillips screwdriver, remove the

screw that holds the developer roller bear-

ing end cap (See photo 11).

Step 10

Using a small flat blade screwdriver, pry off

the developer roller bearing end cap from

the developer roller axle (See photo 12).

Step 11

Lift the developer roller from the toner hop-

per (See photo 13). Slide out the white bear-

ing tab from the developer roller shaft (See

photo 14).

Step 12

Clean the developer roller using a dry, lint-

free cloth and set it aside (See photo 15).

Step 13

Using a Phillips screwdriver, remove

the two screws that hold the doctor

blade onto the toner hopper (See

photo 16). Remove and clean the

doctor blade by using dry com-

pressed air and then a dry lint-free

cloth. Set doctor blade aside.

PHOTO 16

Step 14

Remove the toner fill plug with a pair

of pliers (See photo 17). Dump out

the toner from the toner hopper and

clean it with dry compressed air or a

vacuum.

NOTE: OEM fill plugs get damage

most of the time and may need to

be replaced.

PHOTO 17

rights

reserved.

Future

Graphics

Corporation (FGIC) is a distributor of compatible

replacement parts and products for imaging equip-

ment. None of FGIC's products are genuine OEM

replacement parts and no affiliation or sponsorship

is to be implied between FGIC and any OEM.

Imaging