Brother HL-4040CN Teknik Talimatlar - Sayfa 3

Yazdırma Sunucusu Brother HL-4040CN için çevrimiçi göz atın veya pdf Teknik Talimatlar indirin. Brother HL-4040CN 6 sayfaları. Brother printer - laser printer user manual
Ayrıca Brother HL-4040CN için: Broşür (4 sayfalar), Hızlı Kurulum Kılavuzu (35 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Parça Referans Listesi (40 sayfalar), Servis Güncelleme Kılavuzu (11 sayfalar), Temizlik ve Bakım (7 sayfalar), Servis Kılavuzu (13 sayfalar), (Danca) Kullanım Kılavuzu (35 sayfalar)

Sayfayı Yazdır

Brother HL-4040CN Technical Instructions

PHOTO 11

PHOTO 12

PHOTO 13

PHOTO 14

PHOTO 15

Step 9

Using a Phillips screwdriver, remove the

screw that holds the developer roller bear-

ing end cap (See photo 11).

Step 10

Using a small flat blade screwdriver, pry off

the developer roller bearing end cap from

the developer roller axle (See photo 12).

Step 11

Lift the developer roller from the toner hop-

per (See photo 13). Slide out the white bear-

ing tab from the developer roller shaft (See

photo 14).

Step 12

Clean the developer roller using a dry, lint-

free cloth and set it aside (See photo 15).

Step 13

Using a Phillips screwdriver, remove

the two screws that hold the doctor

blade onto the toner hopper (See

photo 16). Remove and clean the

doctor blade by using dry com-

pressed air and then a dry lint-free

cloth. Set doctor blade aside.

PHOTO 16

Step 14

Remove the toner fill plug with a pair

of pliers (See photo 17). Dump out

the toner from the toner hopper and

clean it with dry compressed air or a

vacuum.

NOTE: OEM fill plugs get damage

most of the time and may need to

be replaced.

PHOTO 17

rights

reserved.

Future

Graphics

Corporation (FGIC) is a distributor of compatible

replacement parts and products for imaging equip-

ment. None of FGIC's products are genuine OEM

replacement parts and no affiliation or sponsorship

is to be implied between FGIC and any OEM.

Imaging