Brother HL-4040CN Технические инструкции - Страница 3

Просмотреть онлайн или скачать pdf Технические инструкции для Сервер печати Brother HL-4040CN. Brother HL-4040CN 6 страниц. Brother printer - laser printer user manual
Также для Brother HL-4040CN: Брошюра (4 страниц), Руководство по быстрой настройке (35 страниц), Брошюра и технические характеристики (2 страниц), Справочный список деталей (40 страниц), Руководство по обновлению сервиса (11 страниц), Чистка и уход (7 страниц), Руководство по эксплуатации (13 страниц), (Датский) Руководство пользователя (35 страниц)

Печатать страницу
Brother HL-4040CN Технические инструкции
Brother HL-4040CN Technical Instructions
PHOTO 11
PHOTO 12
PHOTO 13
PHOTO 14
PHOTO 15
Step 9
Using a Phillips screwdriver, remove the
screw that holds the developer roller bear-
ing end cap (See photo 11).
Step 10
Using a small flat blade screwdriver, pry off
the developer roller bearing end cap from
the developer roller axle (See photo 12).
Step 11
Lift the developer roller from the toner hop-
per (See photo 13). Slide out the white bear-
ing tab from the developer roller shaft (See
photo 14).
Step 12
Clean the developer roller using a dry, lint-
free cloth and set it aside (See photo 15).
Step 13
Using a Phillips screwdriver, remove
the two screws that hold the doctor
blade onto the toner hopper (See
photo 16). Remove and clean the
doctor blade by using dry com-
pressed air and then a dry lint-free
cloth. Set doctor blade aside.
PHOTO 16
Step 14
Remove the toner fill plug with a pair
of pliers (See photo 17). Dump out
the toner from the toner hopper and
clean it with dry compressed air or a
vacuum.
NOTE: OEM fill plugs get damage
most of the time and may need to
be replaced.
PHOTO 17
© 2008 Future Graphics Imaging Corporation. All
rights
reserved.
Future
Graphics
Corporation (FGIC) is a distributor of compatible
replacement parts and products for imaging equip-
ment. None of FGIC's products are genuine OEM
replacement parts and no affiliation or sponsorship
is to be implied between FGIC and any OEM.
3
Imaging