Kohler K-1018 Manuel d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler K-1018. Kohler K-1018 40 pages. Shower modules and receptors
Également pour Kohler K-1018 : Manuel du propriétaire (8 pages)

Imprimer la page

4. Fasten the Receptor in Place

NOTE: If the unit is shimmed, make sure the length of the fasteners is sufficient to span the shims and penetrate

into the studs at least 1" (2.5cm).

- Tack the corners of the receptor into place using #6 large head galvanized nails (not supplied) to fasten the unit.

- Shim the receptor as needed at each of the remaining wall studs and finish nailing the receptor into place in the

predrilled holes.

NOTE: The finished walls should be installed as plumb as possible. If the finished walls are not plumb, the

shower door installation will be affected.

- Complete the finished walls.

1024937-2-

Kohler Co.