Kohler K-1018 설치 매뉴얼 - 페이지 14

{카테고리_이름} Kohler K-1018에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1018 40 페이지. Shower modules and receptors
Kohler K-1018에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (8 페이지)

페이지 인쇄

4. Fasten the Receptor in Place

NOTE: If the unit is shimmed, make sure the length of the fasteners is sufficient to span the shims and penetrate

into the studs at least 1" (2.5cm).

- Tack the corners of the receptor into place using #6 large head galvanized nails (not supplied) to fasten the unit.

- Shim the receptor as needed at each of the remaining wall studs and finish nailing the receptor into place in the

predrilled holes.

NOTE: The finished walls should be installed as plumb as possible. If the finished walls are not plumb, the

shower door installation will be affected.

- Complete the finished walls.

1024937-2-

Kohler Co.