Avtech RMA-SS1-SEN Note d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Avtech RMA-SS1-SEN. Avtech RMA-SS1-SEN 7 pages. Smoke sensor w/escape light
Également pour Avtech RMA-SS1-SEN : Note d'installation (3 pages)
Imprimer la pageSmoke Sensor (RMA-SS1-SEN)
The Silence Feature
The Silence Feature can temporarily quiet an unwanted alarm for several minutes.
To use this feature, press the Test/Silence button on the cover. The Escape Light will turn off
and the LED will flash every 10 seconds (for up to 10 minutes) to remind you the alarm has
been silenced.
Do not stand too close to the unit when the alarm is sounding. Exposure to the horn at
close range may harm your hearing.
Sensor Features & Specifications
Environment Condition Monitored
Type Of Sensor
Normal State
Alarm State
Power Supply
Sensor Cable Type
Included
Length
Maximum Extendible Length
Operating Temperature
Compatible Products
Smoke
Switch
Open (Smoke Sensor not triggered)
Closed (Smoke Sensor triggered)
9V alkaline battery
Low-voltage two-wire speaker cable
Yes
25'
900'
40° F (4.4° C) to 100° F (37.8° C)
Any Room Alert model or Wireless Sensor Hub
Page 6
AVT-171211-1.1.0