HP ProCurve 1600M Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HP ProCurve 1600M. HP ProCurve 1600M 28 pages. Redundant power supply
Également pour HP ProCurve 1600M : Fiche technique (12 pages), Lisez-moi d'abord (8 pages), Manuel du réviseur (27 pages), Manuel complémentaire (2 pages), Manuel complémentaire (2 pages), Manuel d'installation (28 pages), Manuel d'installation (36 pages), Manuel d'installation rapide (2 pages), Manuel d'installation rapide (4 pages), Manuel de l'utilisateur (8 pages), Supplément au manuel (28 pages), Lisez-moi d'abord (16 pages), Installation et retrait (2 pages), Manuel d'installation (12 pages), Manuel de planification et de mise en œuvre (40 pages), Instructions de démontage du produit en fin de vie (2 pages), Manuel d'installation (46 pages), Manuel de diagnostic (2 pages), Instructions de démontage (2 pages)

Imprimer la page
HP ProCurve 1600M Manuel d'installation

1. Download Switch Software

Verify Current Switch Software

Your HP ProCurve Switch 2424M must be running OS version C.06.06 or later
to support the Gigabit Stacking Module. To determine which OS version is
running in the switch, connect a console to the switch and perform the
following (see the switch Installation Guide for more information about
connecting a console and using the console interface):
1. From the console Main Menu, press [1] to select Status and Counters... to
display the Status and Counters menu.
2. Press [1] again to select General System Information ... to display the Switch
Information screen, as shown in the next figure.
3. Check the "Firmware revision" line.
• If the revision number is C.06.06 or later, the switch can support the
Gigabit Stacking Module, and you do not need to download new soft-
ware to the switch. In this case, go to "Installing Transceivers in the
Module" on page 6.
• If the revision number is earlier than C.06.06, download the new soft-
ware before installing the Gigabit Stacking Module. In this case,
continue with the instructions in this section before you install the
module.
OS Version information
Installing the Module
3