Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Note d'installation (46 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Manuel de l'utilisateur (17 pages), Note d'installation (24 pages), Manuel (19 pages), Note d'installation (36 pages)

Imprimer la page
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation
Contents
The DRAM DIMMs on the Supervisor Engine 1A with an MSFC (WS-X6K-SUP1A-MSFC) are located
Note
beneath the MSFC. The MSFC is not field replaceable. Re-installing the MSFC could damage your
supervisor engine. To upgrade the DRAM, you must also upgrade the MSFC to an MSFC2. Both
upgrades are available in the MEM-S1-128MB-UPG= upgrade kit.
For information on removing the MSFC, refer to the Catalyst 6500 Series Multilayer Switch Feature
Card 2 Installation Note at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_10605.htm
Contents
This publication consists of these sections:
•
•
•
•
•
•
•
•
•
•
•

Memory Recommendations and Requirements

See
Table 1
Catalyst Software
Release
6.x
Catalyst 6500 Series Supervisor Engine 1A DRAM Upgrade Installation Note
2
Table 1
for memory recommendations and requirements.
Memory Recommendations and Requirements
Memory
With Catalyst software releases 6.x, your Supervisor Engine 1A configuration
is fully supported with 64-MB DRAM.
Recommendation/
Requirement
78-14357-02