Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 36 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Note d'installation (46 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Note d'installation (18 pages), Manuel de l'utilisateur (17 pages), Note d'installation (24 pages), Manuel (19 pages)

If you are upgrading a WS-X6748-GE-TX Ethernet module with a DFC4 daughter card and your

Step 4

WS-X4748-GE-TX module is equipped with a stiffener bracket that goes across the top of the heat sinks

at the front of the module (see

with the CFC daughter card removal procedure. To remove the bracket, follow these substeps:

Loosen and remove the six phillips-head screws that secure the bracket to the module.

Carefully lift and remove the bracket from the module.

Do not reinstall the stiffener bracket. After upgrading the WS-X6748-GE-TX Ethernet module with a

Caution

DFC4 daughter card, the bracket can be discarded.

Figure 1

Stiffener

bracket

Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note

OL-24918-02

Figure

1), you must first remove the stiffener bracket before continuing

WS-X6748-GE-TX Ethernet Module Equipped with a Stiffener Bracket

WS-X5530

Removing a CFC or DFC3 Daughter Card