Cisco Performance Routing Engine 5 Manuel d'installation du matériel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco Performance Routing Engine 5. Cisco Performance Routing Engine 5 35 pages.
Également pour Cisco Performance Routing Engine 5 : Manuel de démarrage rapide (2 pages)

Imprimer la page

Cisco Performance Routing Engine 5 Manuel d'installation du matériel

• Ensure that you are properly grounded with an ESD-preventive wrist strap.

Procedure

Step 1

Save the startup configuration and running configuration to the primary PC media card, redundant PC media card, or the

TFTP server (if you are removing a PRE2 or PRE4). If you are removing a PRE5, save the startup configuration and

running configuration to the TFTP server or USB disks.

Step 2

Power off the router.

Step 3

Disconnect the cables from the PRE.

Step 4

If you are removing a PRE2 or PRE4 module, remove the PC media card or the CompactFlash Disk from the PRE. If

you are removing a PRE5, go to the next step in the procedure.

Step 5

Loosen the top and bottom captive screws on the PRE.

Figure 4: Loosening the Captive Screws on a PRE4