Cisco Performance Routing Engine 5 Manual de instalação do hardware - Página 10

Procurar online ou descarregar pdf Manual de instalação do hardware para Hardware de rede Cisco Performance Routing Engine 5. Cisco Performance Routing Engine 5 35 páginas.
Também para Cisco Performance Routing Engine 5: Manual de início rápido (2 páginas)

Imprimir página

Cisco Performance Routing Engine 5 Manual de instalação do hardware

• Ensure that you are properly grounded with an ESD-preventive wrist strap.

Procedure

Step 1

Save the startup configuration and running configuration to the primary PC media card, redundant PC media card, or the

TFTP server (if you are removing a PRE2 or PRE4). If you are removing a PRE5, save the startup configuration and

running configuration to the TFTP server or USB disks.

Step 2

Power off the router.

Step 3

Disconnect the cables from the PRE.

Step 4

If you are removing a PRE2 or PRE4 module, remove the PC media card or the CompactFlash Disk from the PRE. If

you are removing a PRE5, go to the next step in the procedure.

Step 5

Loosen the top and bottom captive screws on the PRE.

Figure 4: Loosening the Captive Screws on a PRE4