Cisco Performance Routing Engine 5 Manuale di installazione dell'hardware - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Hardware di rete Cisco Performance Routing Engine 5. Cisco Performance Routing Engine 5 35.
Anche per Cisco Performance Routing Engine 5: Manuale di avvio rapido (2 pagine)

Stampa la pagina

Cisco Performance Routing Engine 5 Manuale di installazione dell'hardware

• Ensure that you are properly grounded with an ESD-preventive wrist strap.

Procedure

Step 1

Save the startup configuration and running configuration to the primary PC media card, redundant PC media card, or the

TFTP server (if you are removing a PRE2 or PRE4). If you are removing a PRE5, save the startup configuration and

running configuration to the TFTP server or USB disks.

Step 2

Power off the router.

Step 3

Disconnect the cables from the PRE.

Step 4

If you are removing a PRE2 or PRE4 module, remove the PC media card or the CompactFlash Disk from the PRE. If

you are removing a PRE5, go to the next step in the procedure.

Step 5

Loosen the top and bottom captive screws on the PRE.

Figure 4: Loosening the Captive Screws on a PRE4