Cisco Performance Routing Engine 5 하드웨어 설치 매뉴얼 - 페이지 10

{카테고리_이름} Cisco Performance Routing Engine 5에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Performance Routing Engine 5 35 페이지.
Cisco Performance Routing Engine 5에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Cisco Performance Routing Engine 5 하드웨어 설치 매뉴얼

• Ensure that you are properly grounded with an ESD-preventive wrist strap.

Procedure

Step 1

Save the startup configuration and running configuration to the primary PC media card, redundant PC media card, or the

TFTP server (if you are removing a PRE2 or PRE4). If you are removing a PRE5, save the startup configuration and

running configuration to the TFTP server or USB disks.

Step 2

Power off the router.

Step 3

Disconnect the cables from the PRE.

Step 4

If you are removing a PRE2 or PRE4 module, remove the PC media card or the CompactFlash Disk from the PRE. If

you are removing a PRE5, go to the next step in the procedure.

Step 5

Loosen the top and bottom captive screws on the PRE.

Figure 4: Loosening the Captive Screws on a PRE4