Cisco ASR 9000 Series Configuration - Page 19

Parcourez en ligne ou téléchargez le pdf Configuration pour {nom_de_la_catégorie} Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 pages. Line card
Également pour Cisco ASR 9000 Series : Configuration des paramètres du réseau (26 pages), Manuel de configuration (46 pages), Manuel de configuration (50 pages), Manuel (24 pages), Manuel (44 pages), Manuel de référence rapide (7 pages)

Imprimer la page

Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router

Command or Action

Step 13

no shutdown

Example:

RP/0/RSP0/CPU0:router (config-if)# no

shutdown

Step 14

end

commit

Example:

RP/0/RSP0/CPU0:router(config-sonet)# end

RP/0/RSP0/CPU0:router(config-sonet)#

commit

Step 15

show interfaces pos interface-path-id

Example:

RP/0/0/CPU0:router# show interfaces pos

0/1/1/0

Configuring a Clear Channel SONET Controller for T3

This task explains how to configure a SONET line into a single T3 serial channel called clear channel.

Clear channel is established by setting the T3 controller mode to serial.

Prerequisites

•

SUMMARY STEPS

OL-26061-03

You should know how to configure the SONET controller as specified in the

Clear Channel SONET Controllers"

on the Cisco ASR 9000 Series Router

configure

controller sonet interface-path-id

clock source {internal | line}

Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide

Purpose

Removes the shutdown configuration.

Note

Removal of the shutdown configuration eliminates the

forced administrative down on the interface, enabling it to

move to an up or down state (assuming that the parent

SONET layer is not configured administratively down).

Saves configuration changes.

When you issue the end command, the system prompts you to

•

commit changes:

Uncommitted changes found, commit them before

exiting(yes/no/cancel)?

[cancel]:

Entering yes saves configuration changes to the running

–

configuration file, exits the configuration session, and

returns the router to EXEC mode.

Entering no exits the configuration session and returns the

–

router to EXEC mode without committing the

configuration changes.

Entering cancel leaves the router in the current

–

configuration session without exiting or committing the

configuration changes.

Use the commit command to save the configuration changes to

•

the running configuration file and remain within the

configuration session.

(Optional) Displays the interface configuration.

section of the

Configuring Clear Channel SONET Controllers

module.

How to Configure Channelized SONET/SDH

"How to Configure

HC-335