3D Systems CubePro Manuel d'instructions original - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions original pour {nom_de_la_catégorie} 3D Systems CubePro. 3D Systems CubePro 18 pages. Unjamming extruder
Également pour 3D Systems CubePro : Manuel (11 pages), Manuel d'instructions original (12 pages)
Imprimer la page
7.
Using a 2.5 mm hex nut driver, loosen and remove the four (4) screws
securing the interior heater to the standoffs. Carefully set the heater
aside on top of the printer floor.
8.
Using a 3 mm hex head driver, loosen and remove all nine (9) 3
mm hex head bolts securing the inner floor. Retain the screws for
reassembly.
9.
Lift the front of the floor plate and carefully disconnect the cables from
the cartridge sensors.
3D Systems, Inc.
9