3D Systems CubePro Manual de instruções original - Página 10
Procurar online ou descarregar pdf Manual de instruções original para Impressoras 3D 3D Systems CubePro. 3D Systems CubePro 18 páginas. Unjamming extruder
Também para 3D Systems CubePro: Manual (11 páginas), Manual de instruções original (12 páginas)
Imprimir página
7.
Using a 2.5 mm hex nut driver, loosen and remove the four (4) screws
securing the interior heater to the standoffs. Carefully set the heater
aside on top of the printer floor.
8.
Using a 3 mm hex head driver, loosen and remove all nine (9) 3
mm hex head bolts securing the inner floor. Retain the screws for
reassembly.
9.
Lift the front of the floor plate and carefully disconnect the cables from
the cartridge sensors.
3D Systems, Inc.
9