Baumer AMG11 N29 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Baumer AMG11 N29. Baumer AMG11 N29 41 halaman. Absolute encoders with profinet interface

Halaman Cetak

4.3.3.

Manual name assignment

To perform an I/O system network scan, go to „PLC" – „Edit Ethernet Node" – „Browse". The scan provides

all bus nodes. In the example the PLC and encoder „encoder01" was found.

The MAC address serves as a unique identifier. When clicking the button „Flash" the highlighted device will

flash its status-LED so it can be found easily amongst other devices.

A double-click on the desired line (here: encoder "encoder01") opens the window "Edit Ethernet Node"

Enter the new name required for configuration in line „Device name". Click "Assign name" to execute. After

this, the encoder will immediately be recognized with this name in the PROFINET Network.

Baumer_BUDE-PROFINET_MA_EN.docx

14.06.2016 / bja

11/41