Bosch 800 Series Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Oven Bosch 800 Series. Bosch 800 Series 48 halaman. Built-in wall ovens
Juga untuk Bosch 800 Series: Panduan Petunjuk Instalasi (24 halaman), Panduan Instalasi (40 halaman), Panduan Penggunaan dan Perawatan (12 halaman), Panduan Instalasi (23 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (32 halaman), Buku Petunjuk (32 halaman), Panduan Instalasi (32 halaman), Panduan Memulai Cepat dan Keselamatan (7 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (32 halaman), Panduan Petunjuk Instalasi (40 halaman), Panduan Penggunaan dan Perawatan (33 halaman), Panduan Penggunaan dan Perawatan (49 halaman), Panduan Memulai Cepat (7 halaman), Panduan Memulai Cepat dan Keselamatan (13 halaman), Panduan Instalasi (32 halaman), Panduan Servis (36 halaman), Panduan Petunjuk Instalasi (29 halaman), Panduan Penggunaan dan Perawatan (24 halaman), Panduan Penggunaan dan Perawatan (40 halaman), Panduan Petunjuk Instalasi (28 halaman)

Bosch 800 Series Panduan Instalasi

Before You Begin

Tools and Parts Needed

Phillips head screwdriver
Slotted screwdriver 1/8" (3,5 mm)
Adjustable wrench
Tongue and groove pliers
Socket or flat wrench 3/8" (10 mm) or tongs
Socket or flat wrench 7/8" (22 mm) or tongs
Drill with 5/16" (8 mm) bit
Pencil
Tape measure
Teflon tape or pipe-joint compound
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts Included

30":
* Attached to the appliance.
8
B e f o r e Y o u B e g i n
36":
* Attached to the appliance.

Removing Packaging

See the diagram on the packaging.
If straps are present, cut the straps.
Cut plastic down back of unit making sure not to cut
the unit.
Remove plastic film.
Lift the cardboard carton from the top of the range and
dispose of.
Remove the corner posts, making sure that any other
packing materials running between the corner posts
are also removed.
Remove all internal packaging and tape.
The rear vent trim is nested in the styrofoam
packaging for shipping purposes. Do not throw away.