Bosch 800 Series Installation Manual - Page 8

Browse online or download pdf Installation Manual for Oven Bosch 800 Series. Bosch 800 Series 48 pages. Built-in wall ovens
Also for Bosch 800 Series: Installation Instructions Manual (24 pages), Installation Manual (40 pages), Use And Care Manual (12 pages), Installation Manual (23 pages), Installation Manual (28 pages), Installation Manual (32 pages), Instruction Manual (32 pages), Installation Manual (32 pages), Quick Start And Safety Manual (7 pages), Use And Care Manual (40 pages), Installation Manual (40 pages), Installation Manual (32 pages), Installation Instructions Manual (40 pages), Use And Care Manual (33 pages), Use And Care Manual (49 pages), Quick Start Manual (7 pages), Quick Start And Safety Manual (13 pages), Installation Manual (32 pages), Service Manual (36 pages), Installation Instructions Manual (29 pages), Use And Care Manual (24 pages), Use And Care Manual (40 pages), Installation Instructions Manual (28 pages)

Print Page
Bosch 800 Series Installation Manual

Before You Begin

Tools and Parts Needed

Phillips head screwdriver
▯
Slotted screwdriver 1/8" (3,5 mm)
▯
Adjustable wrench
▯
Tongue and groove pliers
▯
Socket or flat wrench 3/8" (10 mm) or tongs
▯
Socket or flat wrench 7/8" (22 mm) or tongs
▯
Drill with 5/16" (8 mm) bit
▯
Pencil
▯
Tape measure
▯
Teflon tape or pipe-joint compound
▯
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts Included

30":
* Attached to the appliance.
8
B e f o r e Y o u B e g i n
36":
* Attached to the appliance.

Removing Packaging

See the diagram on the packaging.
If straps are present, cut the straps.
▯
Cut plastic down back of unit making sure not to cut
▯
the unit.
Remove plastic film.
▯
Lift the cardboard carton from the top of the range and
▯
dispose of.
Remove the corner posts, making sure that any other
▯
packing materials running between the corner posts
are also removed.
Remove all internal packaging and tape.
▯
The rear vent trim is nested in the styrofoam
▯
packaging for shipping purposes. Do not throw away.